System3d - optymalne rozwiązania dla obróbki skrawaniem

TS 440 to kompaktowa sonda z transmisja na podczerwień zaprojektowana do zastosowania w centrach obróbczych z automatyczną zmianą narzędzi.

TS440.jpg

Specifications
TS 440
TS 444
Probe accuracy
≤ ± 5 µm when using a standard stylus
Probe repeatability
Repeated probing from one direction
2 σ ≤ 1 µm at a probing velocity of 1 m/min
Typical values:
2 σ ≤ 1 µm at a probing velocity of 3 m/min
2 σ ≤ 4 µm at a probing velocity of 5 m/min
Deflection of probe contact
≤ 5 mm in all directions (with stylus length L = 40 mm)
Deflection force
Axial: approx. 7 N / Radial: approx. 0.7 to 1.3 N
Probe velocity
≤ 5 m/min
Protection EN 60529
IP 67
Operating temperature / Storage temperature
10 °C to 40 °C / –20 °C to 70 °C
Weight without taper shank
Approx. 0.4 kg
Taper shank*
  • With taper shank (for selection see Touch Probes brochure)
  • W/o taper shank (connecting thread M12 x 0.5)
Signal transmission
Infrared transmission with 360° range
Transmission angle of infrared signal*
0° or +30°
Transmitter/receiver unit*
SE 540, SE 640 or SE 642
TS switch-on/off
Infrared signal from SE
Power supply/
energy generation
Batteries, rechargeable or nonrechargeable
Air turbine generator; Recommended operating pressure of the compressed air (5.5 to 8) x 105 Pa
Power storage 
2 batteries (rechargeable or nonrechargeable), size 2/3 AA or size N1)each 1 to 4 V
Integrated high-power capacitors; Charging time Typically 3 s at 5.5 x 105 Pa
Operating time
Continuous duty typically 200 hours with lithium batteries2) 3.6 V/1200 mAh
Typically 120 s
Accessories
SE 540, SE 640, SE 642

* Please indicate when ordering
1) Via adapter, included in delivery
2) Included in delivery

pobierz katalog pdf

All information from  www.heidenhain.com