System3d - optymalne rozwiązania dla obróbki skrawaniem

Together with the measuring cycles of the CNC control, the TT 449 tool touch probe enables the TNC to measure tools automatically while they are in the machine spindle. The control saves the values measured for tool length and radius in the central tool file. By inspecting the tool during machining you can quickly and directly measure wear or breakage to prevent scrap or rework.If the measured deviations lie outside the tolerances, or if the monitored life of the tool is exceeded, the control can lock the tool or automatically insert a replacement tool.

TT449.jpg

Specifications
TT 140
TT 449
Probe accuracy
≤ ± 15 µm
Probe repeatability
Repeated probing from one direction
2 σ ≤ 1 µm at a probing velocity of 1 m/min
Typical values:
2 σ ≤ 1 µm at a probing velocity of 3 m/min
2 σ ≤ 4 µm at a probing velocity of 5 m/min
Deflection of probe contact
≤ 5 mm in all directions
Deflection force
Axial approx. 8 N; 
Radial approx. 1 N
Probe contact*
Diameter 40 mm or 25 mm
Probe velocity
≤ 5 m/min
Protection EN60529
IP 67
Operating temperature
10 °C to 40 °C
Storage temperature
-20 °C to 70 °C
Weight
Approx. 1.0 kg
Approx. 0.6 kg
Mounting on the machine table
TT 140 – Fastening by fixing clamps
TT 140 – Fastening with mounting base (accessory)
TT 449 – Fastening by fixing clamps
TT 449 – Fastening with mounting base (accessory)
Power supply
10 to 30 V / ≤ 100 mA (with no load)
2 batteries (rechargeable or nonrechargeable), size 2/3 AA or size N1); each 1 to 4 V; operating time typically 200 h 2)
Output signals; signal transmission
One HTL square-wave signal and its inverted signal 
Trigger signals S and S
Signal levels at 24 V rated voltage 
UH ≥ 20 V at -IH ≤ 20 mA 
UL ≤ 2.8 V at IL ≤ 20 mA
Infrared transmission with 360° range; transmission angle of the infrared signal 0°
Electrical connection
Cable, 3 m, in metal armor with connector, 7-pin
Via SE 642 transmitter/receiver unit
TT switch-on/off
-
Infrared signal from SE 642
Cable length
≤ 50 m
-
Accessories
Mounting base
Mounting base
SE 540, SE 640, SE 642

* Please indicate when ordering
1) By adapter, included in delivery
2) With lithium batteries 3.6 V/1200 mAh (included in delivery)

pobierz katalog pdf

All information from  www.heidenhain.com